P-Tech® 280
Gas Shielded Metal Cored Wire – High Strength Applications
P-Tech® 280 is seamless, gas shielded, metal cored alloy wire, developed for robotic manufacturing or maintenance and repair applications where highest integrity welding, efficiency and productivity are required.
Features & Benefits;
– Excellent weldability for single and multipass welds.
– Excellent surface appearance & a flat bead without undercutting or cracking.
– No starting defects & no spatter.
– Welds with high resistance to fatigue & good resistance to impact at sub zero temperatures.
Panzercrom P-Tech® 350
Gas Shielded Metal Cored Wire – Hardfacing Applications
P-Tech® 350 is seamless, gas shielded, metal cored alloy wire, ideal for rebuilding worn cast steel sections, medium carbon steel parts and buffering layers for wearfacing applications.
Features & Benefits;
– Good resistance to compression and plastic deformation.
– Multi-pass deposit capability.
– Dense, magnetic deposit.
– Easily machinable with cutting tools.
Panzercrom P-Tech® 600
Gas Shielded Metal Cored Wire – Hardfacing Applications
P-Tech® 600 is seamless, gas shielded, high alloy Cr-Si-C metal cored wire, designed exclusively to provide protective coating against wear caused by impact, adhesion (metal-metal friction) and abrasion.
Features & Benefits;
– Spatter free & regular weld bead profile.
– Significantly faster deposition rate.
– Wide parameter range for welding & positional weldability.
– Low heat input for low dilution.
Panzercrom P-Tech® 650
Gas Shielded Metal Cored Wire – Hardfacing Applications
P-Tech® 650 is seamless, high chromium alloyed metal cored wire, applicable with shielding gases or even without gas protection, designed to resist high stress grinding abrasion with low impact.
Features & Benefits;
– Low heat input & low dilution.
– Significantly faster deposition rate.
– Spatter free & regular bead profile.
– The deposit can show stress relief cracks.
Panzercrom P-Tech® 680
Gas Shielded Metal Cored Wire – Hardfacing Applications
General Characteristics
P-Tech® 680 is seamless, gas shielded, Ni-B alloyed metal cored wire, designed to provide exceptional resistance fine particle abrasion & erosion under moderate impact with a structural matrix which is reinforced by extra hard carbides.
Features & Benefits;
– Low heat input & low dilution.
– Significantly faster deposition rate.
– Spatter free & regular bead profile.
– The deposit can show stress relief cracks.
Panzercrom P-Tech® 750
Gas Shielded Metal Cored Wire – Hardfacing Applications
P-Tech® 750 is gas shielded flux cored wire for protective coatings of parts subjected to metal metal friction, cavitation, and corrosion at high temperature. The rust-free special alloyed weld deposit has a high hot wear resistance, tensile strength and a high resistance to sliding wear of
metallic objects.
It has a good retention of hardness up to 650 °C and is nonscaling up to 900 °C, thermal shock resistant and resistant to sudden changes of temperature, work hardening, not crack sensible.
Tough, highly-creep resistant deposit & ideal for use as cladding with no
risk of cracking.
Panzercrom P-Tech® 770 P
Gas Shielded Metal Cored Wire – Hardfacing Applications
P-Tech® 770 P is gas shielded, new generation hardfacing flux cored wire that has a macrocrystalline structure with a large number of embedded Cr-Mo-Nb-W and particularly hard iron boride phase, developed for extreme abrasive wear at high operating temperatures is
expected or for single layer welding where a great hardness and wear resistance is needed.The wear resistance is retained at temperatures of up to approx. 750 °C and ductility sufficient.
Panzercrom P-Tech® Cast Ni
Gas Shielded Solid Welding Wire – M&R Applications
P-Tech® Cast Ni is gas shielded, solid welding wire, developed for welding of ferritic and austenitic nodular cast iron as well as for joining it with unalloyed and high-alloyed steels, copper and nickel alloys.
Features & Benefits;
– Excellent weldability for single and multipass welds.
– Tough welding deposit.
– Crack-resistant.
– Easily machinable with cutting tools.
PrimeHARD®
Gas Shielded Metal Cored Wire – Hardfacing Applications
PrimeHARD is an open arc flux cored wire that provides tungsten carbides with Ni-based matrix.
It is designed for the parts which are exposed to extreme mineral wear in combination with corrosion. Nickel-based matrix provides corrosion resistance and homogeneous tungsten carbides in matrix obtain extreme abrasion resistance.
Weld metal contains approximately %55WC and %45 Ni matrix.